41
3.9.2.1 Create/edit/delete user profile
If a user has a user profile, he can only call up the functions at the welding
power source which are released for him.
Log in to the welding power source with the access level "Configurator" to
change user profiles.
Create/edit user profile
Proceed as follows to open the user management:
1. Press the "Hold" and "Key" buttons simultaneously until the
configuration menu appears.
2. Select and confirm the menu "User management" using the rotary
knob.
3. Open the submenu "Overview".
4. Select and confirm an empty field using the rotary knob.
•
A submenu appears.
5. Select "Edit" in the submenu.
•
A new menu opens.
A user profile consists of:
•
a six-digit password
•
a user name with a maximum 30 characters
•
an allowed job range of at least 1 to max. 994 jobs
•
a defined operating level
6. Give the user profile a name.
7. Specify a password.
The password must be unique. It must not be used for another user profile
at the same time.
8. Define the allowed job range.
When defining a job range, pay attention that the job range release in the
higher level menu is set to "Allowed jobs".
9. Select an operating level.
NOTICE!
NOTICE!
NOTICE!
NOTICE!
