CLIVET WSAT-YSC4, Manual

Page: 9 / 76

Positioning
 Installation must be in accordance with local regulations. If
they do not exist, follow EN378 .
During positioning consider these elements:
 customer approval

unit weight and bearing point capacity
 safe accessible position

functional spaces
 spaces for the air intake/exhaust

electrical connections

max. distance allowed by the electrical connections

water connections
Functional spaces
Functional spaces are designed to:

guarantee good unit operation

carry out maintenance operations
 protect authorized operators and exposed people
 Respect all functional spaces indicated in the TECHNICAL
INFORMATION section.
Positioning
Units are designed to be installed:

EXTERNAL
 in fixed positions
 Put the unit in a position where any leaking gas cannot enter
buildings or stagnate in closed areas. In the latter case,
observe the rules for machinery rooms (ventilation, leak
detection, etc.).
Installation standards:
 install the unit raised from the ground

bearing points aligned and leveled

discharged condensation water must not cause harm/danger
to people and property
 the accumulation of snow must not cause clogging of the
coils

avoid installations in places subject to flooding
Limit vibration transmission:
 use anti-vibration devices or neoprene strips on the unit
support points

install flexible joints on the hydraulic connections
Protect the unit with suitable fence in order to avoid access to
unauthorised personnel (children, vandals, etc.)
A correct circulation of the air is mandatory to guarantee the
good unit operating..
The unit must be level.
Do not go up to the surface
3 - SELECTING THE INSTALLATION SITE