CLIVET WSAT-YSC4, Manual

Page: 42 / 76

Alarm list - 2
7 - CONTROL
ID Description
EE0054 Tripping of the protections of pump 1 on the Recovery system side
EE0055 Tripping of the protections of pump 2 on the Recovery system side
EE0056 Tripping of the protections of pump 3 on the Recovery system side
eE0057 Tripping of the protections of the recovery pump inverter
ee0060 Electrical panel max temperature
ee0100 POL98U_1 hardware module disconnected from the Process Bus
ee0101 POL98U_2 hardware module disconnected from the Process Bus
ee0102 POL96U hardware module disconnected from the Process Bus
ee0103 TimeOut POL96U_1
ee0104 POL965 hardware module disconnected from the Process Bus
ee0105 TimeOutModPOL94U
ee0106 TimeOutModPOL94U_2
ee0107 POL985_1 hardware module disconnected from the Process Bus
ee0108 POL985_2 hardware module disconnected from the Process Bus
ee0109 POL965_1 hardware module disconnected from the Process Bus
ee0110 POL98U_3 hardware module disconnected from the Process Bus
ee1001 Faulty refrigerant temperature sensor 3
ee1002 Faulty refrigerant temperature sensor 5
ee1003 Faulty pressure sensor on heating low pressure side
ee1004 Expansion valve 1 blocked
ee1005 Expansion valve 2 blocked
EE1006 Tripping of the protections of compressor C1
EE1007 Tripping of the protections of compressor C2
EE1008 Tripping of the protections of compressor C3
EE1009 Tripping of the protections of the source1 pump inverter
ee1010
It switches the pump for the source1 flow alarm. Only if the alarm is not manual and if there are pumps
available that are not active
ee1011 EEV 3.1 blockage
EE1013 Tripping of the protections of source pump 1
EE1014 Tripping of the protections of source pump 2
EE1015 Tripping of the protections of source pump 3
EE1018 Fan thermal circuit 1
ee1022 Faulty compressor drain temperature sensor
ee1023 Faulty temperature sensor for discharge of refrigerant to compressor 2
ee1024 Faulty temperature sensor for discharge of refrigerant to compressor 3
ee1026 Failure of the water temperature sensor at the outlet of the exchange coil on the source side
ee1027 Suction temperature (BT11.1)
ee1028 Discharge pressure (BP1.1)
ee1029 Intake pressure (BP2.1)
ee1030 Recovery gas temperature 1.1