22
Speed Setup:
Set the PTZ camera speed (1 to 8).
Preset Setup:
Set the preset position. If the position setup is saved, the PTZ camera will be directed to the set
position by preset number.
Preset Tour
:
6 different preset lists can be created. If the created preset lists are set to “ON”, the PTZ will run the
preset tour.
Pattern Setup
:
Pattern can be created by movement, zoom, focus, and iris. After pressing the BEGIN button,
adjust the PTZ camera’s position or zoom and press the END button. All directions (up, down, left, and right),
zoom and iris settings are recorded. If using Clinton PTZs; set to Pelco Protocol to make this function available.
Pattern Tour
:
The PTZ camera moves according to the saved pattern.
Auto Focus
:
Turn On/Off auto focus. This feature is not available when using Clinton PTZ cameras.
Power:
Turn On/Off power. This feature is not available when using Clinton PTZ cameras.
Light:
Turn On/Off light. This feature is not available when using Clinton PTZ cameras.
OSD Menu:
Turn On/Off OSD.
CAMEO MENU
ZOOM:
After clicking on Zoom, a red box will appear in the middle of the screen. With the mouse - Left click and hold
down the mouse button to draw a zoom selection box. The selection will be highlighted in blue. Releasing the left
mouse button will zoom to the selected area. The position of the zoomed selection is indicated on the PIP window in
the lower right corner of the screen.
AUDIO ON:
Turn the audio on for the selected channel. This will only be used when an audio device is attached to
the associated channel.
Cameo Menu / PTZ / MENU
A small zoom selection will zoom to 4X.
A larger zoom selection will zoom to 2X.
The YELLOW box in the PIP window shows
where the zoomed area is in relation to the
overall camera image.
