www.climbingtechnology.com
- 2 -
DRAWINGS
| DISEGNI | DESSINS | DRAWINGS | DIBUJOS
WEB_IST12-2D651CT rev.3 07-13
2 | CLICK UP MODE - BELAYING THE LEADER
Before start belaying it is mandatory to test the correct functioning of the device!
During belaying at all times hold the free end of the rope in your hand!
2.1
GIVING SLACK
2.2
TAKING UP SLACK
2.3
ARRESTING A FALL
2.4
LOWERING
With one hand, bend
the free end of the rope
and feed it through the
device; with the other pull
the climber’s rope.
With one hand pull the
free end of the rope
through the device; with
the other pull the climber’s
rope towards the device.
Hold the free end of the
rope firmly in one hand
and pull it downwards.
Don’t hold the device
in your hands!
Open the lever H and
push it downwards, with
the other hand feed the
free end of the rope
through the device.
1 | CLICK UP MODE - INSTALLATION AND SETUP
This mode is ideal for use on well-equipped multi-pitch sport climbing routes with fixed anchors, such as bolts or glue-in anchors.
A safety check between the climber and the belayer is essential before start climbing!
1.1
SETUP
1.2
SETUP
1.3
SETUP
1.4
SETUP IS OK!
1.5
LOCKING TEST
1.6
RELEASE
Connect the
karabiner to
the belay loop
of the harness.
Insert the loop of the rope
in the slot B, referring to
symbols 1-4 on the de-
vice.
With single rope,
use the slot opposite
the karabiner gate.
Insert the karabiner
in the hole F with
the rope inside.
Close the karabi-
ner gate!
The system is OK.
From now on
always hold the
free end of the
rope in your
hand!
Check the device
works correctly
before use, verifying
that it locks the
rope with a typical
“CLICK” sound.
To start belaying
a leader, push the
device forwards to
return the karabi-
ner to position F.
