6
IP(CID):
IP/GPRS reporting in CID
format.
Mail:
Email reporting. (SMTP setting
required)
Voice:
Voice message reporting.
Delete:
Choose “Delete” to remove
existing report setting.
Step 4.
For GSM/SMS(CID)/IP(CID/IP(SIA)
setting, you will be asked to enter an
account number.
Step 5.
Enter the IP address for IP reporting,
email address for email reporting or
telephone/mobile number for
GSM/SMS reporting.
Step 6.
For IP reporting, enter the port number.
Step 7.
Select a group for the report
destination.
The reporting priority is based on to
group number sequence. From Group
1
Group
Group 2
Group 3
….etc
When more than one reporting
destinations are assigned to a group,
if a report is sent to one of the
detinations successfully, the system
will stop reporting to the rest of the
reporting destination in the same
group and move on to report to the
next group.
If the Control Panel fails to send report
to the first detination in a group, it will
move on to the next reporting
destination. If all reporting destinations
in the group cannot be reached, the
Control Panel will move on to the next
group
If the Control Panel fails to report to all
reporting groups, it will start reporting
from group 1 and continue retrying
until one report is made successfully.
Step 8.
Select the event type to be reported to
this report destination.
All:
All events will be reported.
Status:
Only status events will be
reported.
Alarm:
Only
alarm events will be
reported.
2.4. Test Report
This function is for you to test the reporting
destination you entered.
Step 1.
Select
Test Report
and press
OK
to
confirm.
Step 2.
The Control Panel will send a test
report to the first reporting destination.
2.5. Record Message
Use the function to record your Address
Message for Voice Report, the Address
Message is the first message played in every
voice report to notify the call recipient of the
caller’s information. The maximum length of
the message is 10 seconds.
Step 1.
Select
Record Msg
and press
OK
to
confirm.
S t a r t R e c o r d i n g
( O K ? )
Step 2.
Press
OK
to start recording.
R e c o r d i n g . . .
P r e s s O K t o s t o p
Step 3.
The Control Panel will emit a beep.
Start recording after the beep, speak
clearly and slowly for the Control Panel
to record your address. When you
finish recording, press
“OK”
to stop
recording, the recording will
automatically stop when it reaches 10
second.
<
<
N
N
O
O
T
T
E
E
>
>
If you do not record your own Address
Message, the system will play default
alarm message when reporting. The
default message is “Alarm System.”
2.6. GSM Setting
The GSM function allows you to program
GRPS network and MMS settings,
Step 1.
Select
GSM Setting
and press
OK
to
confirm.
G P R S S
e
t t i n g
M M S S
e
t t i n
g
G S M S
i g
n
a
l
G S M R
e
s
e
t
Summary of Contents for VST-2752
Page 1: ...fCx Jan 06 2014...