16
I n
t e
r
v
a l
S
M
T
P
F
r
o
m
Current IP
The Control Panel’s current local area network
IP will be displayed
DHCP
On:
If DHCP is set to On, the Network will
obtain the IP address automatically with a valid
Network DHCP Server. You do not need to do
any settings. You can only set DHCP to
On
if
your Network environment supports DHCP. It
will automatically generate all network
information.
Off:
If DHCP is set to Off, you neet to enter the
Network information manually for
IP Address,
Subnet mask, Gateway, and DNS
. Please
make sure that you have obtained all required
values for your Network environment. Contact
local service provider if necessary
IP Address/Subnet Mask/Gateway/DNS
You only need to configure these settings if
DHCP is set to Off.
Step 1.
To edit the setting, select the option to
edit and press
OK
to confirm..
Step 2.
Enter a new setting, press
OK
to
confirm.
SNTP
The SNTP setting is for you to enter an internet
time server IP to synchronize and update
Control Panel time automatically according to
set interval time. Factory Default is:
pool.ntp.org.
Step 1.
To edit the setting, select t
SNTP
and
press
OK
to confirm..
Step 2.
Enter a new IP Address if desired,
press
OK
to confirm.
I P
A d
d
r e
s
s
p o o l . n t p . o r g
Interval
Set the interval time for SNTP setting to update
Control Panel time
Step 1.
To edit the setting, select t
Interval
and
press
OK
to confirm.
Step 2.
Select your desired interval time, press
OK
to confirm..
4
h
o
u
r
8
h
o
u
r
1
2
h
o
u
r
1 6 h o u r
2 0 h o u r
2 4 h o u r
SMTP
The SMTP setting is for you to program the
mail server related settings. The email account
you set here would be used to email the
triggered images/videos from PIR
Camera/Video Camera. For email destination,
please refer to
Media
Upload
section.
Step 1.
To edit the email information, select
SMTP
and press
OK
to confirm.
Step 2.
Enter your SMTP setting, press
OK
to
confirm.
S M T P
The format of SMTP setting is:
smtp://user:password@mail server
User:
email account user name. For example,
if your email account is
,
enter
john
.
Password:
email account password.
Mail Server:
Email server domain name.
The default port used by SMTP is Port
25
. If
you want to specify other ports, enter the port
number according to format below:
smtp://user:password@mail server:port
<
<
N
N
O
O
T
T
E
E
>
>
The control panel does not support
encryption method such as SSL/TLS.
SMTP setting must be entered in all
lowercase letters
From
This is for you to set the email account used to
send captured picture/video. This setting
should be entered along with SMTP setting.
Step 1.
To edit the email information, select
From
and press
OK
to confirm.
Step 2.
Enter the email account according to
SMTP setting. Ex: [email protected].,
press
OK
to confirm.
E m a i l a
c
c
o
u n t
<
<
N
N
O
O
T
T
E
E
>
>
The format of From setting is:
Summary of Contents for VST-2752
Page 1: ...fCx Jan 06 2014...