Climax VST-2752, User Manual, Page: 16 / 55

13
select an attribute, Factory Default is
set to
Entry for Door Contact and PIR
Sensor

Burglar

When the system is in any Arm
mode, if a “
Burglar ” device is
triggered, a “ Burglar Alarm ” will
be activated immediately and
reported.

Home Omit

When the system is in Home
Arm 1/2/3 mode, if a “
Home
Omit ” device is triggered, the
Control Panel will not raise
alarm. It will still send a report
for this event

When the system is in Full Arm
mode, if a “
Home Omit ” device
is triggered, the Control Panel
will respond in the same way as
if a “
Burglar ” device is triggered.

Home 1/2 Omit

When the system is in Home
Arm 1/2 mode, if a “
Home 1/2
Omit ” device is triggered, the
Control Panel will not respond. It
will still send a report for this
event

When the system is in Away
Arm or Home Arm 3 mode, if a
“
Home 1/2 Omit ” device is
triggered, the Control Panel will
respond in the same way as if a
“
Burglar ” device is triggered.

Home 1/3 Omit

When the system is in Home
Arm 1/3 mode, if a “
Home 1/3
Omit ” device is triggered, the
Control Panel will not respond. It
will still send a report for this
event

When the system is in Away
Arm or Home Arm 2 mode, if a
“
Home 1/2 Omit ” device is
triggered, the Control Panel will
respond in the same way as if a
“
Burglar ” device is triggered.

Home Access

When the system is in Home
mode, if a “ Home Access ”
device is triggered, the Control
Panel will start an Entry Delay
period to give enough time to
disarm the system. It will also
send a report for this event

When the system is in Full Arm
mode, if a “
Home Access ”
device is triggered, the Control
Panel will start a Burglar Alarm
and a burglar message will be
reported.

Delay Zone

When the system is in any Arm
mode, if a “
Delay Zone ” device
is triggered, a “ Burglar Alarm ”
will be activated immediately
and reported.

When the system is in any
Armed mode, and the Control
Panel is counting down the
Entry Delay, if a “
Burglar ”
device is triggered, the Control
Panel will not respond.

During the Exit Delay period, if a
“
Burglar ” device is triggered,
the Control Panel will not
respond .

Away Only

When the system is in Away
Arm mode, if an “
Away Only ”
device is triggered, a “ Burglar
Alarm ” will be activated
immediately and reported.

When the system is in any
Home Arm mode, if an “
Away
Only ” device is triggered, the
Control Panel will not respond.

During the Entry Delay or Exit
Delay period, if an “
Away Only ”
device is triggered, the Control
Panel will not respond .

Entry

When the system is in any Arm
mode, if an “
Entry ” device is
triggered, the Control Panel will
start an Entry Delay countdown
timer for the user to disarm the
system.

After the delay period has