20
Group Control
The Group Control functions allows you to
control learnt in Power Switch groups.
Step 1.
Select
Group Control
and press
OK
to confirm.
Step 2.
Select the Power Switch group you
want to control
Step 2.
Select to turn on/off the group. All
Power Switches assigned to the group
will be turned on/off accordingly.
2.10. Network Setting
Program your network and email SMTP setting
under this menu.
Step 1.
Select
Network Setting
, press OK to
confirm.
C u r r e n t I P
D H C P
I P A d d r e s s
S u b n e t M a s k
G a t e w a y
D N S
S N T P
I n t e r v a l
S M T P
F r o m
Current IP (Disabled for VST-2745)
The Control Panel’s current local area network
IP will be displayed.
DHCP (Disabled for VST-2745)
On:
If DHCP is set to On, the Network will
obtain the IP address automatically with a valid
Network DHCP Server. You do not need to do
any settings. You can only set DHCP to
On
if
your Network environment supports DHCP. It
will automatically generate all network
information.
Off:
If DHCP is set to Off, you neet to enter the
Network information manually for
IP Address,
Subnet mask, Gateway, and DNS
. Please
make sure that you have obtained all required
values for your Network environment. Contact
local service provider if necessary.
IP Address/Subnet Mask/Gateway/DNS
(Disabled for VST-2745)
You only need to configure these settings if
DHCP is set to Off.
Step 1.
To edit the setting, select the option to
edit and press
OK
to confirm..
Step 2.
Enter a new setting, press
OK
to
confirm.
SNTP
The SNTP setting is for you to enter an internet
time server IP to synchronize and update
Control Panel time automatically according to
set interval time. Factory Default is:
pool.ntp.org.
Step 1.
To edit the setting, select t
SNTP
and
press
OK
to confirm..
Step 2.
Enter a new IP Address if desired,
press
OK
to confirm.
I P A d d r e s s
p o o l . n t p . o r g
Interval
Set the interval time for SNTP setting to update
Control Panel time
Step 1.
To edit the setting, select t
Interval
and
press
OK
to confirm.
Step 2.
Select your desired interval time, press
OK
to confirm..
4 h o u r
8 h o u r
1 2 h o u r
1 6 h o u r
2 0 h o u r
2 4 h o u r
SMTP
The SMTP setting is for you to program the
mail server related settings. The email account
you set here would be used to email the
triggered
images/videos
from
PIR
Camera/Video Camera. For email destination,
please refer to
Media
Upload
section.
Step 1.
To edit the email information, select
SMTP
and press
OK
to confirm.
Step 2.
Enter your SMTP setting, press
OK
to
confirm.
S M T P
The format of SMTP setting is:
smtp://user:password@mail server
User:
email account user name. For example,
if your email account is
enter
john
.
Password:
email account password.
Mail Server:
Email server domain name.
The default port used by SMTP is Port
25
. If