13
Entry1 Time
If a device set to Entry1 attribute is triggered
when the system is armed, the Control Panel
will begin an Entry Delay countdown timer
according to your Entry Time setting. The
system must be disarmed before the timer
expires or an alarm will be activated. The Entry
Timer for Away Arm and Home Arm can be
programmed separately.
(Factory Default is
10 seconds
)
Step 1.
Select
Entry Time
and press
OK
to
confirm.
A w a y A r m
H o m e A r m
Step 2.
Select an arm mode to edit its Entry
Time, press
OK
to confirm.
D i s a b l e
1 0 s e c
. . .
. . .
7 0 s e c
Step 3.
The screen will display current setting.
To change the setting, select a new
option and press OK to confirm.
Entry2 Time
If a device set to Entry2 attribute is triggered
when the system is armed, the Control Panel
will begin an Entry Delay countdown timer
according to your Entry Time setting. The
system must be disarmed before the timer
expires or an alarm will be activated. The Entry
Timer for Away Arm and Home Arm can be
programmed separately.
(Factory Default is
10 seconds
)
Step 1.
Select
Entry Time
and press
OK
to
confirm.
A w a y A r m
H o m e A r m
Step 2.
Select an arm mode to edit its Entry
Time, press
OK
to confirm.
D i s a b l e
1 0 s e c
. . .
. . .
7 0 s e c
Step 3.
The screen will display current setting.
To change the setting, select a new
option and press OK to confirm.
Exit Time
When you arm the system, the Control Panel
will begin an Exit Delay countdown timer
according to your Exit Time setting, and enter
selected arm mode after the timer expires.
(Factory Default is
10 seconds
)
Step 1.
Select
Exit Time
and press
OK
to
confirm.
A w a y A r m
H o m e A r m
Step 2.
Select an arm mode to edit its Exit
Time, press
OK
to confirm.
D i s a b l e
1 0 s e c
. . .
. . .
7 0 s e c
Step 3.
The screen will display current setting.
To change the setting, select a new
option and press OK to confirm..
Alarm Length
When an alarm is activated, both the
Control Panel siren and external siren
will raise alarm according to the Alarm
Length setting. (Factory Default is
3
minutes
.)
Step 1.
Select
Alarm Length
and press
OK
to
confirm.
D i s a b l e
1 m i n
. . .
. . .
1 5 m i n
Step 2.
The screen will display current setting.
To change the setting, select a new
option and press OK to confirm.
Supervision
Set the supervision timer for accessory
devices, if no supervision signal is received
within set duration for a certain device, the
Control Panel will report the situation
accordingly. (Factory Default is
12 hour
)
Step 1.
Select
Supervision
and press
OK
to
confirm.
D i s a b l e
4 h r
6 h r
. . .
. . .
1 d a y
Step 2.
Select your desired Supervision time,
press
OK
to confirm.
Sound Setting
This function allows you to program various