Climax Mobile Mates R15 Slim, Installer'S Manual

Page: 85 / 92

82
7 Appendix
7.1 SMS Remote Programming Commands Table
Item Command Example & Usage Default
Make Unit
Scream
(Mobile Lite
only)
SCREAM SCREAM:PROG,1111,60
To set the length of Mobile Lite
’s beeping period (5-60 seconds) to help the
search for Mobile Lite when the device is lost
This command will also request for location information.
--
Locating via
SMS (Mobile
Lite only)
LOC LOC:PROG,1111,1
To locate Mobile Lite user via SMS
Parameter: 0 = No reply to sender
’s mobile number
1 = Reply location to sender
’s mobile number ,
--
Cellular Module
Reset
RSTG RSTG:PROG,1111
To reset Cellular Module
--
GPRS APN,
username &
password
APN APN:PROG,1111,internet,,
To set GPRS APN, username and password (31 characters max. for APN, 31
characters max. for username, 31 characters max. for password)
APN:
Internet
Usernam
e and
password
: empty
Report settings RPT RPT:PROG,1111,1,0933111222,1,0,0,1
To configure report settings (index number, report destination, group, type,
miscellaneous and event filter)
Report Index: 1-5
Report destination: Depending on the reporting format
Group: 1-5
Type: 0 = Speech, 10 = CID_IP, 11 = CID_SIA_IP, 12 = SIA_IP, 13 =
SIA_CID_UDP, 14 = SIA_UDP, 18 = AG_XML, 20= CID_SIA2_IP, 21=
SIA2_IP, 22= CID_SIA2_UDP, 23= SIA2_UDP, 30 = SMS_CID, 31 =
SMS_TEXT,
Miscellaneous: Enter 0 for this parameter
Event filter: 255 = all, 1 = status, 4 = emergency
No report
destinatio
n
Keyword setting KEYWD KEYWD:PROG,1111,IPOG
To set the keyword
15 characters max. for the keyword
PROG
Access Code ACCES ACCES:PROG,1111,1,1234
To set the Access Code (index number, code)
8 digits max. for the Access Code
1111 for
user 1
Guard time
settings (normal
and fall sensor)
GUDT GUDT:PROG,1111,10,15
To set the length of guard time periods (normal: __ seconds, fall sensor: __
seconds)
Normal: 5 = 5 secs, 10 = 10 secs, 15 = 15 secs, 20 = 20 secs, 25 = 25 secs,
30 = 30 secs
Fall sensor: 5 = 5 secs, 10 = 10 secs, 15 = 15 secs, 20 = 20 secs, 25 = 25
secs, 30 = 30 secs
10
Auto check-in
reports
TESTC TESTC:PROG,1111,720,60
To configure the settings of auto check-in reports
Interval: 0 = disable, 240 = 4 hrs, 360 = 6 hrs, 480 = 8 hrs, 720 = 12 hrs, 1440
= 1 day, 2880 = 2 days, 4320 = 3 days, 5760 = 4 days, 7200 = 5 days, 8640 =
6 days, 10080 = 1 week, 21600 = 15 days , 43200 = 30 days
Offset time: 60 = 1 hr, 120 = 2 hrs, 240 = 4 hrs, 360 = 6 hrs, 480= 8 hrs, 720 =
12 hrs
720, 60