59
5.2. For Base 15
Base 15 can learn up to
15
RF devices which can be used to activate the Base
to make emergency report.
Entering Learning Mode
Press the Help Button of the Base for 8 seconds. The Base will emit one beep
at 5
th
and 8
th
second. Release the button after the beep at 8
th
second to enter
learning mode.
Device Learning and Testing
Step 1.
Press the Button on RF device to transmit signal. Refer to RF device
manual for detail.
Step 2.
The Base will emit 2 beeps when it receives the signal from the
pendant to indicate it has learned in the pendant.
Step 3.
Repeat Step 2~3 to learn in all devices, device learnt in will be
assigned from Zone 1 to 15 in sequence.
If the Base has already learnt in 15 devices, it will emit 3 beeps upon
receiving a new device learn code to indicate error.
To test learnt in device, press the device button again after learning,
The Base will emit a long beep if it successfully receives signal from
already learnt in device.
After complete learning, press the Help Button on Base once to exit
learning mode. The Base will emit 2 beeps
Device Removal
Press the Base
’s Help Button twice quickly under learning mode, the Base will
emit two beeps to indicate ALL RF devices have been removed and exit learn
mode automatically.
