Climax CTC-1052-QT-DT35AW, User Manual, Page: 34 / 54

31
-
This is used for learning in non-silent devices.
The available devices that can be learnt-in via Command #93 and #94 are:
 PIR Sensor ----- PIR
 Smoke Detector ---- SD
 Carbon Monoxide Detector---- CO
 Fixed Panic Button ---- PB
 Wrist Transmitter ---- WTR
 Pendant Transmitter ---- WTR
 Water Sensor ---- WS
 Fall Sensor ---- FS

Carbon Dioxide Detector ---- CO2
 Temperature Sensor ---- TS
To learn a silent device or a non-silent device:
Step 1: Depending on the device type, click the Start button besides 93# (Silent Device) or the Start
Button besides 94# (Device) to enter learning mode, a “Panel in learning mode. Please press
Device Button!” message will pop up.
Step 2: Press the Device Button within 20 secs, a “Learn Device success!” message will pop up to
indicate successful learning.
<NOTE>

Learning can only be completed within the signal reception range of CTC-1052-QT-
DT35AW. If no signal is received within 20 sec, a “Learning Fail” message will pop up, and
CTC-1052-QT-DT35AW will automatically return to Programming mode.

Adding a Device for a second time is prohibited unless it is removed from the system first.