7
When an incoming call matches with any of
the programmed Caller ID(s), CTC-1052-
QT-DT35AW will auto-answer the call
without checking access code or any button
press.
CTC-1052-QT-DT35AW will match
the numbers starting from the last digit, and
verify 10 digits at the most.
For example, if a number string 321 is
programmed, CTC-1052-QT will instantly
pick up any call that has 321 as the last 3
digits.
If a number string 17605851848 is
programmed, CTC-1052-QT will instantly
pick up any call that has 7605851848 as the
last 10 digits. The first digit "1" of the Caller
ID will be ignored.
Up to 20 digits are allowed for each Caller
ID.
Function
Selection
Result
(201-220)
Set Caller ID
(1
st
– 20
th
Caller ID)
To set a Caller ID:
Step 1:
Enter
00
+
#
on the phone set, then a
short beep will be heart via the
phone set.
Step 2:
Enter the Caller ID Sequence (
201-
220
) followed by the
*
symbol, and
then the
Caller ID
, and the
#
symbol
at the end to terminate Function
Selection.
Example: 201*27912518#
201 represents it being the 1
st
Caller ID.
27912518 represents the Caller ID
Step 3:
A short beep will be heart via the
phone set if Function Selection is
successful.
Command 01-04
Telephone Number Programming
Used to program the 1
st
-
4
th
Tel. numbers
respectively.
To program the 1
st
Tel. number: enter (
01
)
followed by (
#
). After one short beep, enter
(
telephone number)
followed by (
#
).You
can hear one beep from the telephone
speaker that indicates the programming is
successful.
If you hear CTC-1052-QT-DT35AW emit
one beep instead, that means the
programming of the 1
st
telephone number
has failed. Please repeat the programming
steps again.
Likewise, the 2
nd
, 3
rd
or 4
th
Tel. numbers can
be programmed using Command (
02
), (
03
)
or (
04
) respectively
.
<NOTE>
When entering the phone number,
entering (
) means a 3-second pause.
(e.g. Switchboard system, extension,
etc.). For example, the phone number
is 21111111 and extension number is
255. Enter: 21111111*255.
Up to 20 digits including (
) are
allowed for each telephone number.
The 1
st
, 2
nd
, 3
rd
, and 4
th
Tel. numbers will be
used as primary medical alarm number,
secondary medical alarm number, primary
fire/CO2 alarm number, and secondary
fire/CO2 alarm number, respectively.
Delete Telephone Number
：
To delete the 1
st
Tel. number, enter (
01
)
followed by (
#
), after one short beep, enter
another (
#
). You can hear one beep from
the telephone speaker that indicates the
telephone number has been successfully
deleted.
If you hear CTC-1052-QT-DT35AW emit
one beep instead, that means you have
failed to delete the telephone number.
Please repeat the deleting steps again.
Likewise, you can erase the respective 2
nd
,
3
rd
or 4
th
Tel. Numbers, by following the
above procedure.
Command 05-06
Select Telephone Number for Alarm
Reporting and Status Reporting
<IMPORTANT NOTE>
If the Tel. number is selected in
Commands #5, #6 and #7, then
Command #7 holds the top priority to