Climax BB5500, Operating Manual

Page: 40 / 64

Page 38 BB5500 Operating Manual
The speed controller consists of an electrical enclosure which houses the DC motor
controller, operator pushbuttons and switches. The control functions are as follows:
1. EMERGENCY STOP—press down to stop the machine, then twist and pull up to reset.
2. HPU—Hydraulic power unit start and stop buttons.
3. BAR—start and stop the bar rotation.
4. RPM—increase or decrease the RMP of the bar.
5. RUN/JOG—in RUN mode, the bar turns continuously. In JOG mode, the bar can be
turned by pressing the BAR start button and will stop when the button is released.
6. FEED—controls the movement of the cutting tool.
7. SPEED—increase or decrease the speed of the tool feed.
8. RAPID—maximum speed of the tool feed as long as the button is pressed.
9. RUN/JOG—in RUN mode, the feed moves automatically. In JOG mode, the feed can
be advanced by pressing the FEED start button and will stop when the button is
released.
10. FWD/REV—changes the direction of the tool feed.