Climax BB5500, Operating Manual

Page: 6 / 64

Page 4 BB5500 Operating Manual
Machine Specific Safety
All aspects of the machine have been designed with safety in mind. Following are safety practices that you should keep in
mind when using the Climax BB7000 Boring Bar Machine.
PERSONAL PROTECTIVE EQUIPMENT
Eye and hearing protection must be worn while using the
machine. These safety items do not impose constraints
to the safe operation of the machine.
OPERATING CONDITIONS
Do not operate the machine if it is not mounted to the
workpiece as described in this manual.
TOOLING
The machine is provided with all the tools for the setup
and operation of the machine. Remove all adjustment
tools before starting the machine.
LIFTING
Most of the machine components are heavy and must be
moved or lifted with approved rigging and practices.
Climax accepts no responsibility for the selection of
lifting equipment. Always follow your plant’s procedures
for lifting heavy objects. Do not lift heavy objects by
yourself as serious injury can result.
CUTTING TOOLS AND FLUIDS
There are no cutting or cooling fluids supplied with this
machine. Keep cutting tools sharp and clean.
CONTROLS
The machine controls are designed to withstand the
rigors of normal use and external factors. The on-off
switches are clearly visible and identifiable. If hydraulic
power supply failure occurs, be sure to turn off the
supply before leaving the machine.
DANGER ZONE
The operator and other persons can be anywhere in the
vicinity of the machine. The operator must make sure
there are no other persons in danger from the machine.
METAL FRAGMENT HAZARD
The machine produces metallic fragments during normal
operation. You should wear eye protection at all times
when working with the machine. Only remove fragments
with a brush after the machine has stopped completely.
HAZARDOUS ENVIRONMENTS
Do not use the machine in a hazardous environment,
such as near explosive chemicals, toxic fumes, or a
radiation hazard.
RADIATION HAZARDS
There are no systems or components on this machine
that are capable of producing hazardous EMC, UV or
other radiation hazards. The machine does not use
lasers nor does it create hazardous materials such as
gasses or dust.
ADJUSTMENTS AND MAINTENANCE
All adjustments, lubrication and maintenance should be
done with the machine stopped, and locked out from all
power sources. The shut-off valves should be locked
and tagged out before performing any maintenance. Do
not operate the machine if moving parts are misaligned,
binding or broken. If the machine or parts are damaged,
have the machine repaired before use.
WARNING LABELS
Warning labels are already attached to your machine.
Contact Climax immediately if replacements are
required.
MAINTENANCE
Be sure the machine components are free of debris and
properly lubricated prior to use. Have your machine
serviced by a qualified repair person using only identical
replacement parts
STORED ENERGY
Hydraulic fluids could still be under pressure! Make sure
the HPU is shut off and locked out properly.
MSDS
Material Data Safety Sheets are included in the
maintenance manual.
UNINTENTIONAL STARTING
Prevent unintentional starting. The machine must be
properly locked out and/or shut down before
maintenance.