Climate Technology Add-on Refrigerated Air Conditioning, Owner'S Manual, Page: 26 / 52

Multi-Appliance Comfort Control
Dual Cycle Addon Refrigerated Air Conditioning
8. Press the ON/OFF button to switch the cooler OFF. OFF will appear on the display.
9. The Comfort Control remembers your SET TEMP setting and uses it next time you turn it ON.
ZONES - S
ELECTING
ABCD O
PTIONS
Selecting ZONE ABCD only applies if your home is fitted with optional
motorised ductwork dampers (please consult your installer) that allow
opening or closing of each section of ducting.
Many homes have no motorised ductwork dampers fitted, however the
control will still display the ‘A’ zone. Where zone motors are fitted the
installer can set your controller to show only the zones available for
use.
In homes with more than one zone, at least one zone must be open at
all times. The default zone is A if no other is selected.
The Controller will not allow you to turn all off. If you press and release
ENTER with all zones set to off the Controller will recall your last correct
zone setting.
To set the open or closed status of a ZONE:
1. Press and release the CLEAN FILTER/ZONE ABCD button.
ZONE A (or the current open zone) will flash
2. Press ▼ or ▲ to go to your selected zone. Press the ON/OFF
button to set a zone as open (ON) or closed (OFF). Repeat to
open or close more zones.
3. Press and release ENTER to save your selections. Now the Add-
on air conditioner operates only in your selected zone.
F
AN
O
PERATION
The default setting is for the fan to run at the same time as the condenser unit, therefore thermostatically
cycling on and off with the cooling.
Should you require the fan to run continuously with the condenser only cycling on and off, refer to the
setup section of this document.
P
ROGRAMMING
Y
OUR
C
OMFORT
C
ONTROL
Programming your Comfort Control will provide energy and time savings. Your heating/cooling system will
only operate when you need it, and at your chosen comfort levels.
Determine your most comfortable settings, program them and let your Comfort Control do the rest
automatically.
U
SING THE
P
ROGRAMMING
S
EQUENCE
Refer to Ducted Gas Central Heating Section for Auto Mode and Programming Your Comfort Control .
Comfort Control - PNE Page 26