manualshive.com logo in svg

Climate Technology Add-on Refrigerated Air Conditioning, Owner'S Manual, Page: 2 / 52

Share
Download
Climate Technology Add-on Refrigerated Air Conditioning Owner'S Manual Download Page 2

Multi-Appliance Comfort Control 

 

 

Contents 

INTRODUCTION.............................................................................................................................. 4

 

YOUR MULTI-APPLIANCE COMFORT CONTROLLER............................................................. 4

 

GENERAL INFORMATION. ......................................................................................................... 5

 

Important Installation Notice. .................................................................................................... 5

 

Data Location............................................................................................................................ 5

 

Warranty ................................................................................................................................... 5

 

NAVIGATING THE CONTROLS ..................................................................................................... 6

 

QUICK START ............................................................................................................................. 6

 

QUICK START - SIMPLE MANUAL OPERATION ...................................................................... 6

 

The Comfort Controller ................................................................................................................. 8

 

THE LCD DISPLAY ...................................................................................................................... 8

 

USING THE 9 BUTTONS............................................................................................................. 9

 

SETTING DAY AND TIME ......................................................................................................... 11

 

DUCTED GAS CENTRAL HEATING............................................................................................ 13

 

GENERAL INFORMATION. ....................................................................................................... 14

 

Important Notice...................................................................................................................... 14

 

Data Location.......................................................................................................................... 14

 

Assembly. ............................................................................................................................... 14

 

SAFETY...................................................................................................................................... 15

 

Safety & Owner Responsibility ............................................................................................... 15

 

Precautions. ............................................................................................................................ 15

 

Features. ................................................................................................................................. 15

 

Power or Gas interruption. ...................................................................................................... 15

 

USING YOUR COMFORT CONTROL....................................................................................... 16

 

Manual Operation ................................................................................................................... 16

 

ECONOMY & BOOST for heating .......................................................................................... 17

 

Summer Fan ........................................................................................................................... 17

 

 ZONES - Selecting ABCD options......................................................................................... 18

 

Optional Summer Shutdown ................................................................................................... 18

 

First Startup or Restart After Shutdown.................................................................................. 18

 

Auto Mode............................................................................................................................... 19

 

Programming Your Comfort Control ....................................................................................... 19

 

HEATER MAINTENANCE.......................................................................................................... 21

 

SCHEDULED MAINTENANCE. ................................................................................................. 21

 

PROBLEM SOLVING. ................................................................................................................ 22

 

ADD-ON REFRIGERATED AIR CONDITIONING ........................................................................ 23

 

GENERAL INFORMATION. ....................................................................................................... 24

 

Important Notice...................................................................................................................... 24

 

Data Location.......................................................................................................................... 24

 

Assembly. ............................................................................................................................... 24

 

SAFETY...................................................................................................................................... 24

 

Safety & Owner Responsibility ............................................................................................... 24

 

Precautions. ............................................................................................................................ 24

 

Features. ................................................................................................................................. 24

 

Power interruption................................................................................................................... 24

 

COMFORT CONTROL............................................................................................................... 25

 

Manual Operation ................................................................................................................... 25

 

ZONES - Selecting ABCD Options ......................................................................................... 26

 

Fan Operation ......................................................................................................................... 26

 

Programming Your Comfort Control ....................................................................................... 26

 

 Comfort Control - PNE 

Page 2

Summary of Contents for Add-on Refrigerated Air Conditioning





















































Reviews:

No comments