Room thermostat MTC
3/12
Before use, carefully read these operating instructions and observe them. In case the mounting and
operating instructions are not observed, the manufacturer’s warranty will not apply to any resulting
damage.
2.1 Safety
Electrical devices may only be connected by a qualified electrician. Always observe the relevant
national regulations. Interferences and changes to the device will lead to cancellation of the warranty.
3 Description of the thermostat
1. Display
2. Info button to display information
3. Menu button to enter and exit the menu
4. OK button to confirm a setting
5. + and – buttons to raise or lower settings
6. openings for the temperature sensor
3.1 Concise specifications
•
Room thermostat with clock function
•
Optimising controller
•
Permanent display of the room temperature
•
10 different programmable time blocks
•
Up to 8 heaters controllable
•
Frost protection
•
Keyboard locking
•
Overtime program
•
Ventilation
•
Failure diagnosis of the devices
•
Suppression of interference of the heater
•
Compensation for wall influence
•
suited for remote sensor
•
Supplied battery, excellent for preserving data in case of power failure
3.2 Technical specifications
•
Power supply: low-voltage current
•
Temperature range: 0-30 degrees Celsius
•
Controller: PI
•
Clock: 10 programmable switch blocks
•
Degree of protection: IP30
4 Mounting and electrical connection
4.1 Mounting
The clock thermostat is suitable for mounting in dry, not too dusty rooms.
Place the thermostat in a room in a location where air can circulate
unimpeded. Beware that in winter the low-standing sun cannot shine directly onto the thermostat.
Placement above or near a device that radiates heat is also not recommended. Avoid placement on a
cold outdoor wall; place the thermostat on an indoor wall free of draught. All these things have an
2
4
5
6
3
5
1
