1130CC.COM / 1250CC.COM
13
V-Gauge Lite Manual V1.2
© 2008 Cliftech Design
Figure 18
– The drag timing “ready to start” screen.
Figure 19
– The gear position read out is replaced by a small checkered flag character to indicate the
end of a ¼ mile run. The flag character remains in place for all display screens until the drag data is
reviewed.
The bike has to be stopped to review the data from the run. As previously described, holding
the upper button for at least 2 seconds from the RPM graphical screen brings up the drag timing
data. The data from the run is retained in the V-Gauge Lite, even after it is powered down,
until a new run is recorded. Note, however, that the data is not stored until it is reviewed for
the first time. If the V-Gauge Lite is powered down before looking at the data from a run, it
will be lost and the data from the previously stored run will be retained.
