www.directed.com
60
5.
To adjust Warn-away Zone
z
Press
to increase sensitivity.
z
Press
to decrease sensitivity.
z
The sensor Warn-away zone can be tested at any time during adjustment
and will generate 1 siren chirp each time the zone is activated.
6.
Press
of the remote control to return to Primary zone adjustment and lock
in Warn Away zone setting.
z
Siren chirps 2 times.
z
Primary zone can now be re-adjusted as described in step 3.
z
Or press
again to lock in primary zone setting and exit
programming mode.
z
The siren will chirp 3 times when sensor adjustment mode has been exited.
z
A
Auuttoo--ssccrroollll ffoorr aaddjjuussttiinngg sseennssiittiivviittyy - press and hold
or
to
increase or decrease sensitivity setting several levels rapidly.
remote adjustable omnisensor
The Omnisensor is designed for ease of adjustment by the user and to give the ulti-
mate in impact detection without the possibility of false triggers that are common with
less sophisticated sensor.
Installing the omnisensor
The omnisensor can be located in either the passenger or engine compartment. It must
be firmly mounted with the indicator arrow pointing UP to a vertical metal surface. For
best results it must be secured sheet metal screws using ALL FOUR mounting points.
Adjusting the omnisensor
While adjusting this sensor it is required that you strike the vehicle with the amount
force that is desired for the system to trigger.
C
CA
AU
UTTIIO
ON
N!! DO NOT strike window glass or flat sheet metal panels that can dent eas-
ily. It is recommended that you only strike the metal pillars between the windows, they
are structurally sound enough not to dent. ONLY strike the pillars using the heel of your
hand, it is more than sufficient for the sensor distinguish as a theft attempt.
1.
Disarm system.
2.
Transmit Channel 15 (Press
3 times then
1 time).
z
The LED will turn on and the siren will chirp 1 time.
z
Sensor test and adjustment mode is entered.
