© 2004 directed electronics, inc.
61
3.
To test Primary (full trigger) zone.
z
Press
of the remote control.
z
Siren will chirp 2 times.
z
Hit vehicle.
z
Siren chirps 1 time if hit hard enough to activate sensor.
4.
To adjust Primary zone.
z
Press
of the remote control.
z
Siren chirps 2 times.
z
Sensor adjustment mode is entered.
z
Hit vehicle at the desired level of impact.
z
Sensor adjusts itself to the force of Hit.
z
Siren chirps 1 time as confirmation of adjustment.
z
Press
of the remote control to lock adjustment.
5.
To adjust Warn-away zone.
z
Press .
z
Siren chirps 1 time.
z
Warn-away zone adjustment is entered.
6.
To test Warn-away zone.
z
Press .
z
Siren will chirp 2 times.
z
Hit vehicle.
z
Siren chirps 1 time if hit hard enough to activate sensor.
7.
To adjust Warn-away zone.
z
Press .
z
Siren chirps 2 times.
z
Sensor adjustment mode is entered.
z
Hit vehicle at the desired level of impact.
z
Sensor adjusts itself to the force of Hit.
z
Siren chirps 1 time as confirmation of adjustment.
z
Press
to lock adjustment.
8.
Press
to re-enter Primary zone adjustment.
z
Siren chirps 2 times.
z
Primary zone can now be re-adjusted as described in #4.
z
Or press
again to exit programming mode.
z
The siren will chirp 3 times when sensor adjustment mode has been exited.
N
Noottee:: You must wait 15 seconds for omnisensor to become active after arming.
