manualshive.com logo in svg

Clevo P375SM, User Manual

The Clevo P375SM is a powerful laptop designed for users seeking exceptional performance. Featuring high-end specifications, this product offers a seamless user experience. Easily access and download the free user manual for the Clevo P375SM from manualshive.com, ensuring you have all the information you need to optimize your laptop's potential.

Share
Download
background image

Overview 1 - 1

Quick Start Guide

1

Chapter 1: Quick Start Guide

Overview

This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the
computer and to getting your system started. The remainder of the manual covers the following:

•

Chapter 2

A guide to

 

using some of the main features of the computer e.g. the 

storage devices

 (

hard disk

, 

optical device

, 

Multi-In-1 card reader

), 

Game Keys, Clickpad 

& 

Mouse 

&

 Audio Features

.

•

Chapter 3

 The 

computer’s 

power

 management options.

•

Chapter 4

 

The installation of the 

drivers

 and utilities essential to the operation or improvement of some of the 

computer’s subsystems.

•

Chapter 5

 

An outline of the computer’s built-in software or 

BIOS

 (Basic Input Output System).

•

Chapter 6 

Instructions for 

upgrading

 your computer.

•

Chapter 7 

A quick guide to the computer’s 

RAID

, 

PC Camera, Wireless LAN,

 

Fingerprint, Bluetooth & 

WLAN Combo, TPM, Sound Blaster Audio 

and

 Intel Technology

 modules (some of which may 

be 

optional

 depending on your purchase configuration).

•

Chapter 8

 A 

troubleshooting

 guide.

•

Appendix A

Definitions of the

 interface

, 

ports

/

jacks

 which allow your computer to communicate with external 

devices.

•

Appendix B

  Information on the 

Control Center

.

•

Appendix C

  Information on the 

NVIDIA

 Video driver controls.

•

Appendix D

 The computer’s 

specification

.

Summary of Contents for P375SM





























































































































































































































































































































Reviews:

No comments

Related manuals for P375SM

UMAX Technologies Visionbook 14WR User Manual preview
Visionbook 14WR
Brand: UMAX Technologies Pages: 73
Schenker XMG U726 User Manual preview
XMG U726
Brand: Schenker Pages: 312
Oregon Scientific Barbie B-Glam LC68-12 Manual preview
Barbie B-Glam LC68-12
Brand: Oregon Scientific Pages: 2
ECS 600l User Manual preview
600l
Brand: ECS Pages: 92
Epson NB3s Product Support Bulletin preview
NB3s
Brand: Epson Pages: 11
Toshiba Satellite Pro C650-EZ1515D Specifications preview
Satellite Pro C650-EZ1515D
Brand: Toshiba Pages: 4
Toshiba Satellite Pro C640-SP4019L Specifications preview
Satellite Pro C640-SP4019L
Brand: Toshiba Pages: 3
Toshiba Satellite Pro C640-SP4015L Specifications preview
Satellite Pro C640-SP4015L
Brand: Toshiba Pages: 3
Toshiba Satellite Pro A60 Series Specifications preview
Satellite Pro A60 Series
Brand: Toshiba Pages: 2
Toshiba Satellite Pro C650 Specifications preview
Satellite Pro C650
Brand: Toshiba Pages: 4
Toshiba Satellite Pro A60 Series Brochure & Specs preview
Satellite Pro A60 Series
Brand: Toshiba Pages: 2
Toshiba Satellite Pro A40 Series Specifications preview
Satellite Pro A40 Series
Brand: Toshiba Pages: 2
Toshiba Satellite Pro A210-EZ2202X Specification preview
Satellite Pro A210-EZ2202X
Brand: Toshiba Pages: 2
Toshiba Satellite Pro A210-EZ2203X Specifications preview
Satellite Pro A210-EZ2203X
Brand: Toshiba Pages: 8
Toshiba Satellite Pro A40-J User Manual preview
Satellite Pro A40-J
Brand: Toshiba Pages: 133
Toshiba Satellite Pro A50-A User Manual preview
Satellite Pro A50-A
Brand: Toshiba Pages: 150
Toshiba Satellite Pro C640 User Manual preview
Satellite Pro C640
Brand: Toshiba Pages: 169
Toshiba satellite pro A30-D User Manual preview
satellite pro A30-D
Brand: Toshiba Pages: 165

Brands by name

Popular brands

Load more brands