manualshive.com logo in svg

Clevo P375SM, User Manual

The Clevo P375SM is a powerful laptop designed for users seeking exceptional performance. Featuring high-end specifications, this product offers a seamless user experience. Easily access and download the free user manual for the Clevo P375SM from manualshive.com, ensuring you have all the information you need to optimize your laptop's potential.

Share
Download
background image

Modules

PC Camera Module 7 - 17

7

8.

A scroll arrow will appear on the left side of the screen after any pictures/videos 
have been captured.

9.

Click the arrows (on either side of the screen) to browse through the captured 
photos/video, and back to the Camera app.

10. Clicking on a captured photo will bring up an app bar with 

Crop

 and 

Delete

 

buttons.

11. Use the handles to 

Crop

 any captured picture, and click 

OK

 to save the changes 

made.

12. Click 

Delete 

to delete any captured photo (note that no prompt will appear to 

confirm the delete).

13. Right-click any captured video to bring up app bar with 

Trim

 and 

Delete

 buttons.

14. Use the buttons at either end of the slider to adjust the video length and click 

OK

 to 

save the changes made.

Figure 7 - 11

Crop & Delete 

Buttons 

(for Still Photos)

Figure 7 - 12

Trim & Delete 

Buttons 

(for Video Files)

Summary of Contents for P375SM





























































































































































































































































































































Reviews:

No comments

Related manuals for P375SM

Gateway MX6243m Guía De Configuración preview
MX6243m
Brand: Gateway Pages: 2
Gateway MX6211b User Manual preview
MX6211b
Brand: Gateway Pages: 188
Gateway NV-52 Guía De Referencia preview
NV-52
Brand: Gateway Pages: 150
UMAX Technologies visionbook 14WRx User Manual preview
visionbook 14WRx
Brand: UMAX Technologies Pages: 72
EUROCOM 4200 San Marino User Manual preview
4200 San Marino
Brand: EUROCOM Pages: 281
Acer Swift 3 SF314-59 User Manual preview
Swift 3 SF314-59
Brand: Acer Pages: 85
Acer PREDATOR TRITON 300 SE User Manual preview
PREDATOR TRITON 300 SE
Brand: Acer Pages: 97
Acer AN515-57-72SA User Manual preview
AN515-57-72SA
Brand: Acer Pages: 78
Huawei 1174092 Quick Start Manual preview
1174092
Brand: Huawei Pages: 120
Acer Extensa 15 Series User Manual preview
Extensa 15 Series
Brand: Acer Pages: 20
RM VM7000 User Manual preview
VM7000
Brand: RM Pages: 115
Clevo N850HK1 Service Manual preview
N850HK1
Brand: Clevo Pages: 114
Tadpole SPARCbook 1 Technical Reference Manual preview
SPARCbook 1
Brand: Tadpole Pages: 168
Packard Bell iPower GX Disassembly Manual preview
iPower GX
Brand: Packard Bell Pages: 34
Gigabyte P2532 User Manual preview
P2532
Brand: Gigabyte Pages: 17
EDUGEAR ONEBOOK 801 Owner'S Manual preview
ONEBOOK 801
Brand: EDUGEAR Pages: 24
Gateway Solo 9150 Specifications preview
Solo 9150
Brand: Gateway Pages: 4
eMachines G525 Series (Spanish) Guía Rápida preview
G525 Series
Brand: eMachines Pages: 13

Brands by name

Popular brands

Load more brands