Clevo L390T, Service Manual

Page: 100 / 106

Wall Mounting Info
C - 2 Removing the Stand
C. Wall Mounting Info
Removing the Stand
1. Turn off the computer and disconnect all cables and peripherals.
2. Carefully place the computer flat with the LCD facing down (make sure you cover the LCD to avoid scratches) so
that you may access the rear cover.
3. Remove screws & from the stand cover, and then remove the stand cover .
4. Carefully release cable , and remove screws - .
5. Remove the stand .
6. Remove the rubber covers - .
Figure 1
Stand Removal
a. Remove the screws
and stand cover.
b. Disconnect the cable
and remove the
screws.
c. Remove the stand.
d. Remove the rubber
covers.
C. Stand Cover
I.
Stand
• 6 Screws & 4
Rubber Covers
A B 6
C
D E H
6 I
J M
A
B
D
C
a.
b.
E
F
G
H
c.
I
J
K
L
M
d.
Stand & Screws
Make sure you keep the stand
and removed screws in a safe
place in case you need to re-at-
tach the stand at a later date.