Dip Switch
CPU Type DIP Switch Settings D - 1
D. Dip Switch
Appendix D: CPU Type DIP Switch Settings
This appendix is about the system’s CPU type (
Penryn
or
Celeron
CPU) switch settings.
The following figure shows the location of the CPU Type DIP Switch. You can access the DIP Switch after you remove
the Rear Top Cover. Be sure to turn OFF the system before you perform any part removal procedure.
1.
Remove the rear top cover (see
“Removing the Rear Top Cover” on page 2 - 6
).
2.
Locate the
Dip Switch
at point
.
3.
Set the switch as per the setting in
Table D - 1 on page 2
Figure 1
CPU Type Switch
a. Locate the Dip Switch
CPU_SW1.
b. Adjust the settings for
the CPU as per the in-
structions.
B. CPU Type Switch
(CPU_SW1)
A
A
a.
b.
B
1
2
3
4
Summary of Contents for L390T
