NPM Manual
“Properties” menu. Then the modifying can be sent to NPM. If you fill a wrong value and
the
pas
procedu
3.1
.
onfigurations of PC, you can set the module. Now we had
n
n method of the network parameters for the NPM. So
e b
nfigure the NPM to be part of LAN:
1
uble-click the searched NPM and enter pas
2
）
. Modify the IP in “IP config”, the new IP is
dify the subnet mask in “IP config” to be the same as
dify
” IP config” to be g
r
5
）
. Click
haven’t applied it, you can click “search” and modify again. If the NPM can’t work because of
modifying (For example modify to a wrong IP address, wrong subnet mask, or forget
sword), you can resume defaulting configuration when factory installed. About the detailed
res, please refer to
After finished the network c
k
w
own the properties and the modificatio
egin to co
）
. Do
sword;
an unused IP in the IP pool of the LAN.
subnet mask of LAN.
3
）
. Mo
4
）
. Mo
the gateway in
ateway’s IP address or route
in the “Properties” bla
6
）
. Resume the network parameters of PC.
Now
age N
N
Remote manage NPM via PC
If remote manage and control NPM via PC, do as foll
A) Configure the NPM to be part of
as
B) Let the PC access the Router in the LAN, Map NP
Ro
e
llowing
nk to submit the modifying.
Then the whole configuration is finished.
.
we can man
PM through LA
owing:
above.
the LAN, same
M’s IP and Port (4001 and 3003) in the
uter’s Virtual S rver. As fo
picture.
Page 15 of 28
