background image

NPM Manual 

4.2.10 Change the user 

Entrance:(main menu: system>>change user)   

 

Change the current login user and login again. 

4.2.11. Modem initialization 

Entrance:(main menu: Tools>>modem initialization)   

This function is conveniences connect with the NPM external modem. When the user 

use it, the external modem connect with the pc port directly, then select the parameter (the 

main setting: how many times the system will automatism answer, baud rate, diabolo or no,) 

press ”modify is OK”. ”Default setting ” is rebooting the modem to the manufacture’s setting. 

     Because the different manufacturers produced the modem’s AT are different. The user 
can achieve the initialization works by the window systemic super-terminate if it could not 
achieve the initialization works by the window. 

 

Picture 4.2.11-1

Modem initialization 

 

4.2.12 NPM groups’ configuration 

In order to control the different area NPM, the manufacturers add the function. The user 

can add, delete, modify and setting in the window. 

The groups contain connect scheme, NPM (contain the NPM name, address code 

terminal password), NPM outlet mark, control purview, timing note and so on five items, 
when add a new group, the content is blank and the user can copy it. The following is 
operation information. 

1

 Press   

 Entrance

:(

main menu

  Tools >> Groups Configuration 

 

 add the new grouping, in the form fill the name and 

remark, then keep it. 

2

 Choose one group in the groups list, in the right form will display group name 

and remark information, and then the user can fill the information in the window. 

 

Page 24 of 28

Summary of Contents for NPM2000





























Reviews: