NPM Manual
4:
5:
eans
Screen” section.
Choose NPM, when choose you can read this NPM;
Status parameters of NPM:
1~8: on/off status of NPM outlet, and current of outlets.
Green color means switch on, white color means switch off, grey color m
invalid or have no right to access relative outlet.
A
：
total current of this 8way outlets;
ALL
：
Total current of group A, B, C;
C1: Temperature of place No.1.
T1
：
Humidity of place No.1;
C2
：
Temperature of place No.2;
T2
：
Humidity of place No.2;
F: Smoke sensor: red mark flashes when it detect smoke;
D: Door open sensor: red door mark means door open, gray mark means door closed.
W: Water sensor: water mark flashes when there is water.
6: Manage NPM:
Press to access relative NPM unit control screen, reference “4.2.4 Manage
7: Connection configure
Picture 4.2.2-3 connection configuration
Press “
Connect Type
” button at main screen, it will display configure window, as picture
above:
When “Connect Type” is
Network (TCP/ IP ),
Configuration
parameters as following:
When PC is at the same LAN of PC:
Host IP: Default IP of NPM is 192.168.0.178
Connect Port: Default Port of NPM is 4001
Reset Port: Default reset port of NPM is 3003
When PC control NPM via Internet:
Host IP is WAN port IP of NPM’S LAN. NPM’s IP, Connect Port, Reset Port
must be mapped at NPM’s LAN. More information please refer “Network
configurat
When “Connect Type
ion”Section.
” is
RS-232,
configuration parameter
.
Page 12 of 28
