6 / 10
Clenergy China
Tel86 592 311 0088
999-1009 Min'an Rd, Huoju Hi-tech Ind. Dev. Zone
Fac86 592 599 5028
Xiang'an District 361101, Xiamen, Fujian, China
4.1.3 Make sure the size
and position are correct,
and then place ballasts on
the ballast bars, as shown
in Fig. 3.
Be sure to keep enough
space between the ballast
and the front leg to avoid
impeding the assembling
due to excessively high
ballast.
When wind deflectors are
required, be sure to keep
enough space between
the ballast and the rear
leg, to avoid impeding the
wind
deflector
installation.
4.1.4 Place the first PV
module on the front and
rear legs, with the frame
pressed against the limiting
edge of the front leg. A
distance of 44mm shall be
kept between the frame and
the front leg end and
between the frame and the
rear leg end, as shown in
Fig. 5.
Fig. 3
Fig. 4
Fig. 5
