PULSAR
®
3D SUCTION BLAST CABINET
Page 5
© 2020 CLEMCO INDUSTRIES CORP.
www.clemcoindustries.com
Manual No. 29374
2.2.1
Refer to Figure 2 and apply thread sealant to the
male threads of an air fitting that is compatible with the
air-supply hose fitting, and install it onto the 1/2" NPT inlet
solenoid located on the side of the cabinet. The style of
connection shown in Figure 2 is for reference only. The
air line may also be hard piped.
2.2.2
Connect a 1/2" ID or larger air line from the air
source to the air fitting, as shown in Figure 2.
To avoid the risk of injury from compressed air,
install an isolation valve and bleed-off valve
where the air supply is tapped into the
compressed-air system. This enables a lockout
and tagout procedure and depressurization of
the compressed-air line before performing
maintenance.
Hose disconnection while under pressure can
cause serious injury or death. Use safety lock
pins or safety wire to lock twist-on couplings
together and prevent accidental separation, and
also use safety cables to prevent hose from
whipping should separation occur. Safety lock
pins and safety cables are listed in Section 8.1:
Optional Accessories.
Figure 2
Some items removed for clarity.
1/2" NPT Air Filter
Air-Supply Hose
Air Fitting
Apply thread sealant to male threads
.
