background image

7

8

 WARNING — DEATH or  

SERIOUS INJURY can occur (continued)

• NEVER USE WITH ONLY A LAp BELT TO RESTRAIN A CHILD IN THIS BOOSTER 

SEAT. USE WITHOUT A LAP AND SHOULDER BELT CAN RESULT IN SERIOUS 

INJURY OR DEATH. 

• DO NOT USE THIS BOOSTER SEAT WITH MOTORIZED OR DOOR MOUNTED 

BELT SYSTEMS.

• SECURE THIS CHILD RESTRAINT WITH THE VEHICLE’S CHILD RESTRAINT 

ANCHORAGE SYSTEM IF AVAILABLE OR WITH A VEHICLE BELT.

• DO NOT USE THIS BOOSTER SEAT AFTER AN ACCIDENT OF ANY KIND.  

AN ACCIDENT CAN CAUSE DAMAGE TO THIS BOOSTER SEAT THAT YOU 

CANNOT SEE.

• DO NOT USE THIS BOOSTER SEAT AFTER SEVEN (7) YEARS FROM THE DATE 

OF MANUFACTURE. THE DATE OF MANUFACTURE CAN BE FOUND ON THE 

LABEL AFFIXED TO THE UNDERSIDE OF THE BOOSTER SEAT CUSHION BASE.

• DO NOT ATTEMpT TO MAKE REpAIRS TO OR OTHERWISE MODIFY OR TAMpER 

WITH THIS BOOSTER SEAT.

• NEVER USE THIS BOOSTER SEAT IF IT IS DAMAGED OR HAS MISSING pARTS. 

 WARNING — DEATH or  

SERIOUS INJURY can occur (continued)

• DO NOT USE ACCESSORIES OR pARTS WITH THIS BOOSTER SEAT OTHER 

THAN THOSE PROVIDED BY MAGNA MARQUE INTERNATIONAL. USE OF 

ACCESSORIES OR PARTS FROM OTHER MANUFACTURERS COULD ALTER THE 

PERFORMANCE OF THIS BOOSTER SEAT.

• AVOID BURN INJURY — ALWAYS TOUCH THE SURFACES OF THE PARTS FIRST 

BEFORE PUTTING THE CHILD IN THIS BOOSTER SEAT. THIS BOOSTER SEAT 

CAN BECOME VERY HOT IF LEFT IN THE SUN AND CAN BURN THE  

CHILD’S SKIN. 

• KEEp THIS MANUAL IN THE STORAGE COMpARTMENT LOCATED ON THE 

BOTTOM OF THIS BOOSTER SEAT FOR FUTURE USE.

• NEVER USE A SECOND-HAND BOOSTER SEAT OR A BOOSTER SEAT WHOSE 

HISTORY YOU DO NOT KNOW.

• REGISTER YOUR BOOSTER SEAT WITH MAGNA MARqUE INTERNATIONAL INC.

Summary of Contents for Oobr





































Reviews: