31
32
Step 4.
Complete installation by adjusting this
booster seat so the back of this booster
seat contacts the front of the vehicle
seat back, as shown in
Figure 30
.
To adjust, pull and hold the Recline Handle
on the front of this booster Seat Base
1
and push this booster seat towards the
vehicle’s seat back
2
until the back of this
booster seat sits firmly against the vehicle
seat back, as shown in
Figure 31
. Release
Recline Handle.
Ensure that this booster seat is in contact
with the front surface of the vehicle seat
back. DO NOT allow a gap between this
booster seat and the vehicle seat back,
as shown in
Figure 32
.
Figure 32
Figure 30
1
2
Figure 31
Removing Booster Seat in Backless Mode
When Using LATCH Connectors
Step 1.
Pull on the Recline Handle located on the
front of this booster Seat Base and slide
this booster seat towards you exposing
the LATCH Connectors
1
, as shown in
Figure 33
.
Step 2.
Locate the red buttons on the front of the
LATCH Connectors. Releasing one LATCH
Connector at a time, use your thumb to
press in on one button
2
while using the
other hand to pull this booster seat forward
3
, as shown in
Figure 34
. Repeat for the
opposite LATCH Connector.
To store the LATCH Connectors when not in
use, pull and hold Recline Handle on front
of booster Seat Base and then push LATCH
Connectors into Seat Base.
Step 3.
Remove this booster seat from vehicle.
Figure 33
1
Figure 34
2
3
