49
50
Step 3.
Position the lap belt underneath the Armrest
on the side opposite the vehicle seat belt
buckle, as shown in
Figure 58
.
Step 4.
Pull the lap and shoulder belt over the
child while positioning BOTH the lap and
shoulder belt underneath the Armrest on
the vehicle seat belt buckle side, as shown
in
Figure 59
. Buckle the seat belt.
Figure 59
Figure 58
Step 5.
Pull on the shoulder belt to remove all slack out of the lap
and shoulder belt and snugly adjust the vehicle seat belt
onto the child.
IMPORTANT:
Design and operation of vehicle seat belt
systems vary from vehicle to vehicle and from seating
location to seating location within the same vehicle. Refer
to your vehicle owner’s manual for proper use, placement
and adjustment of the vehicle’s lap and shoulder belts.
Step 6.
Check vehicle seat belt fit on the child:
• Vehicle seat belts MUST fit snugly and lay flat against
the child and MUST not be loose or twisted. A snug seat
belt does not allow any slack. It lies in a relatively straight
line without sagging.
• The lap belt MUST sit low and snugly on the child’s hips.
Pull on the shoulder belt to tighten.
• When sitting on this booster seat, the shoulder belt
MUST lie snugly across the mid point of the child’s chest
and across the center of the shoulder in the GREEN
zone, as shown in
Figure 60
.
Figure 60
