82
Step 8
If installing with a lap/shoulder belt follow the
instructions for a lap/shoulder belt or inflatable
shoulder belt in this section. If installing with a
lap-only belt, skip to
Step 9
.
If installing with lap/shoulder belt:
• Slowly pull the vehicle shoulder belt all the way out
to its full length, and hold.
Figure 78
• With one hand firmly holding the shoulder belt so it
doesn’t retract, wrap the shoulder belt around the back
of the Carrier with the other hand, and tuck the shoulder belt
into the blue Shoulder Belt Guide, as shown in
Figure 78
.
NOTE:
If the vehicle shoulder belt is too short to wrap around
the back of the Carrier, unbuckle the vehicle belt, remove the
lap portion of the belt from the blue Vehicle Lap Belt Guides
and allow the vehicle belt to fully retract. Then repeat
Step 7
,
and do the following as an alternative to
Step 8
:
• Slowly pull the vehicle shoulder belt all the way out to its full
length, and hold. Take care to keep it fully extended.
• Use other hand to shift Carrier more upright so that vehicle
shoulder belt is able to wrap around the back of Carrier
and tuck the shoulder belt into the blue Shoulder Belt Guide.
• Gently shift Carrier so that blue Recline Reference Line is
parallel to the ground.
