27
Figure 11
Support Cushion Removal/Installation:
To Install:
Place the Support Cushion on the Carrier
seating surface with the Buckle Slot aligned with the
Crotch Buckle, and pull the Buckle and Buckle Pad up
through the Buckle Slot in the Support Cushion, as shown
in
Figure 11
.
To Remove:
Lift the Support Cushion off of the Carrier
seating surface, pull Buckle down through Buckle Slot in
Support Cushion, and remove.
IMPORTANT:
After removing the Support Cushion, it may
be necessary to change the shoulder harness height.
ALWAYS check that the Shoulder Harness Straps are
through the Shoulder Harness Slots at or below and
closest to the child’s shoulders. See “Changing Shoulder
Harness Height” section on
page 20
.
Support Headrest Removal/Installation:
To Install:
see “Rethreading the Shoulder Harness”
section on
page 23
.
To Remove:
see “Unthreading the Shoulder Harness”
section on
page 21
.
