76
Step1
Loosen Harness:
• While lifting up on Harness Adjuster
Tab, pull out on Shoulder Harness Straps
as shown in
Figure 113.
Step 2
Place child in car seat with their back
flat against the Seat Back as shown in
Figure 114
.
Step 3
Place child’s arms through Shoulder Harness
Straps and position the Straps over child’s
shoulders and thighs.
Step 4 (for Rear-Facing use only)
Recheck that the Rear-Facing Level
Reference Line appropriate for the child’s
weight is parallel to the ground, as shown
in
Figure 115
, and adjust if necessary. See
“Installing/Removing Rear-Facing Car Seat”
on page 35 if adjustment is required.
Figure 113
Figure 114
Child seat is
properly re
clined in Re
ar-Facing m
ode when t
he line
appropriate
for the chil
d’s weight
is parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
3
• To R
elease
Rigid
LATCH
Conne
ctors:
Fully e
xtend
Conne
ctors, t
hen p
ull Red
Rigid
LATCH
Relea
se Ha
ndles.
2
Forwa
rd-Fa
cing
Rear-
Facin
g
Child seat is
properly reclined in Rear-Facing mode w
hen the line
appropriate
for the chil
d’s weight i
s parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
• To Release Rigid LA
TCH Connectors:
Fully extend Connectors, then pull Red Rigid LA
TCH Release Handles.
Forwa
rd-Fa
cing
Figure 115