62
Step 11
Check fit against the vehicle seat back. If the
back of this car seat cannot be adjusted to
be in contact with the vehicle seat back as
shown in
Figure 86
, try changing the
recline position of this car seat, verify that
the vehicle seat back is in a more upright
position and re-adjust.
If this seat cannot be positioned so that car
seat back is in contact with the vehicle seat
back, try a different LATCH equipped vehicle
seating position, or install with a vehicle belt,
see “Installing Forward-Facing Car Seat With
Vehicle Belt” on page 66 of this manual.
A small gap between the top or bottom of the
car seat and vehicle seat back is acceptable
as long as there is contact with the front
surface of the vehicle seat back or headrest.
Figure 87
shows an unacceptable gap.
Figure 86
Figure 87
