ClearView Network Video Recorder Quick Start Manual Download Page 52

Page: 52 / 317

Please refer to the following sheet for more information.

Name

Function

Display

window

Here is to display the searched picture or file.

Support 1/4/9/16-window playback.

type

Here you can select to search the picture or the recorded file.

You can select to play from the read-write HDD, from peripheral device or from

redundancy HDD.

Before you select to play from the peripheral device, please connect the

corresponding peripheral device. You can view all record files of the root directory

of the peripheral device. Click the Browse button; you can select the file you want to

play.

Important

Redundancy HDD does not support picture backup function, but it supports picture

playback function. You can select to play from redundancy HDD if there are pictures

on the redundancy HDD.

3 Calendar

The blue highlighted date means there is picture or file. Otherwise, there is no

picture or file.

In any play mode, click the date you want to see, you can see the

corresponding record file trace in the time bar.

Playback

mode

and

channel

selection

pane.

Playback

mode

1/4/9/16. (It may vary due to different series.)

In 1-window playback mode: you can select 1-16 channels.

In 4-window playback mode: you can select 4 channels according to your

requirement.

In 9-window playback mode, you can switch between 1-8 and 9-16 channels.

In 16-window playback mode, you can switch between1-16 and 17-32

channels.

The time bar will change once you modify the playback mode or the channel

option.

File list

switch

button

Double click it, you can view the picture/record file list of current day.

The file list is to display the first channel of the record file.

The system can display max 128 files in one time. Use the

or the mouse

to view the file. Select one item, and then double click the mouse or click the

ENTER button to playback.

You can input the period in the following interface to begin accurate search.

File

type

—

regular record

—

external alarm record

—

Motion detect

record.

Lock file. Click the file you want to lock and click the button

to lock. The

file you locked will not be overwritten.

Search locked file: Click the button

to view the locked file.

Return: Click button

, system goes back to the calendar and channel setup

interface.

Summary of Contents for Network Video Recorder






























































































































































































































































































































Search results

Summary of Contents for Network Video Recorder

Reviews:

Related manuals for Network Video Recorder

Brands by name

Popular brands

ClearView Network Video Recorder, Quick Start Manual

Search results

Summary of Contents for Network Video Recorder

Reviews:

Related manuals for Network Video Recorder

Brands by name

Popular brands