Cover Conduit Installation Guide
Cut a section of 2" yellow strap to length
and wrap it around the conduit connector
and secure it to the ratchet.
Step
6
.
NOTE: Be sure to tighten ratchets evenly
and check regularly for adjustment if strapping
becomes loose.
60DA166C Coupler
190S099
190P0795
190P0795
190S099
Step 1. Assemble all sections of
cover conduit using two (2)
Tek Screws; one (1) on each
side of the pipe.
Step 2.
Insert all sections of
cover conduit into
the cover pockets.
Step 3.
Insert a cover conduit coupler
between the conduit pipes at each
of the 12 connection points.
Step 4.
Secure the cover conduit coupler
to the conduit pipes by using two (2)
Tek Screws per side of conduit pipe.
Step 5.
Secure one (1) 2" ratchet
12 inches below the existing
1" ratchet on the outside of each
ground post (if this is not done yet).
35 of 36
