The V-There interface is designed to be operated with the remote control and
keyboard.
To begin using your remote control and keyboard, open the panel at the back
of each and insert the two AA batteries supplied for each. Take care to insert the
batteries in the correct direction, as illustrated by the line drawings in the battery
compartment.
When replacing batteries, ensure that the new batteries are AA non-
rechargeable and always replace the entire set. If you mix used and fresh batteries,
you might damage your remote control or keyboard.
CHAPTER 3: Controlling V-There
ClearOne Communications
~ www.clearone.com
Using the Remote Control
Navigating with the remote control
The handheld remote (see Figure 3.1, page 14) control is factory programmed to
work with the V-There system. No user programming is necessary.
Navigating the onscreen interface with the remote control is easy; press the
arrow buttons and the Enter button.
You can also use the keyboard to navigate the V-There screens. For more
information on navigating with the keyboard, see the Using the Keyboard section
on page 15.
When you navigate the screen, a white box indicates your position on the
screen. When you have highlighted a field, icon, or drop-down list, press the Enter
button to select your choice.
