After you have finished making connections to the rear panel of the V-There, turn it
on using the switch on the back of the unit. The first time you power on the unit (or
after you reset the unit to factory defaults), it will initiate an onscreen configuration
wizard that walks you through the system setup.
You do not need to complete every step to begin using your V-There. For
example, if you choose to use your ISDN connection in the configuration wizard,
and will not be connecting the unit to a LAN, you do not need to complete the
configuration screens for network (LAN) setup.
After you complete the configuration wizard, you can make subsequent
adjustments in the Expert Mode of the user interface. To enter the Expert Mode,
press the Expert/Novice Mode button on the keyboard to display Expert System
Setup.
There are several occasions when you will use the Expert Mode:
•
When you turn on your V-There for the first time
•
After a software upgrade
•
After resetting the V-There to factory defaults
•
To add or edit phone directory entries or presentations
CHAPTER 5: Configuration
ClearOne Communications
~ www.clearone.com
Configuring V-There
The first time you turn on
your V-There, it will
initiate an onscreen
configuration wizard that walks you
through the initial system setup for
the network, gatekeeper, and ISDN.
✍
Refer to the sections on the
following pages after the
initial setup if you want to
change settings, or if you want
information about additional
settings not covered in the
configuration wizard.
✍
