INTERACTIVE MODULE
PreciseTouch
TRANSFORM ANY FLAT SURFACE
into
a TOUCHSCREEN
QUICK INSTALLATION GUIDE
Page 1: ...INTERACTIVE MODULE PreciseTouch TRANSFORM ANY FLAT SURFACE into a TOUCHSCREEN QUICK INSTALLATION GUIDE ...
Page 2: ...also add the PreciseTouch scanner component Step 2 Put the assembled PreciseTouch on top center of the screen or another flat surface where it will be used Tighten the supporting rod then use the provided allen wrench to fixate PreciseTouch scanner Step 3 Use the provided USB cable to connect PreciseTouch to a computer or another device with which it will be used Step 4 Perform calibration To do t...
Page 3: ...at the 4 point calibration has started Tap on the cursor as it will appear on the edges of the working surface with the PrecisePen starting with top left There will be beeps every time a point is calibrated After 4 points are calibrated there will be two short beeps calibration is done and the device is ready for use Calibration of each point must not take longer than 40 seconds otherwise calibrat...
Page 4: ...ower Consumption 0 6 W Arm Length 36 cm Weight 420 g PRECISEPEN Model A PP01 Signal 940 nm IR Nib Trigger Mode Omni directional Charging Method Mini USB Power Supply Supercapacitor Charging Time 3 min Full Power Run Time 2 hours Charge Retention Time 72 hours Length 13 5 cm Diameter 18 mm Weight 25 g Interactive Module PreciseTouch A PT01 Counterweight Supporting Rod Allen Wrench Micro USB cable P...
