2.
In the Directory Settings window, set the following options and parameters
Enable Online Directory Registration
– When selected, this checkbox activates
the rest of the fields in this window and enables the Online Directory connection
registration.
Server Type
– Select the Online Directory server type. If you are not sure which
type to select, consult with your system administrator. An LDAP (Lightweight
Directory Access Protocol) server is usually used.
Server Address
– The server’s IP address. If an IP is not entered, the following
message appears: "You must enter server address in order to continue."
Port
– Number of the port through which the connection to the server is
established.
Path
– Folder in which your user information is stored, as created on the Online
Directory.
Server Domain
– Server’s domain name for the Online Directory.
User Name
– Your user name as defined on the Online Directory server.
Password
– Your access password as defined on the Online Directory server.
3.
Select
Apply
.
NOTE: In the Standalone/Gatekeeper mode, either the ILS or
iPlanet servers should be installed for the directory. Consult with
your system administrator regarding the installation/configuration
of these servers.
Server Type
Description
Prerequisites
ILS server
Site Server ILS is a service used for publishing
H.323 videoconferencing and telephony users
and IP multicast conferences on the network.
System administrator configuration
iPlanet server
Sun’s ONE Directory Server (also known as
iPlanet) is a scalable distributed directory
server for running an enterprise-wide directory
System administrator configuration
Collaborate Room: User Guide 53
