5.
Select
Call
in the GUI or press the
Make Call
(green button) on the remote control. The
Calling screen appears.
When the call is answered on the far end, the system switches to Call mode.
AUTO-ANSWERING CALLS
The auto-answer option is found in the Call Settings window (see Call Settings).
When the auto-answer option is not selected and an incoming call is received, a message is
displayed on the screen. You can accept or reject the call using the buttons on the remote
control, or via the screen message (Yes/No).
NOTE: Auto-answering does not apply to MCU calls. (To configure
auto-answering in MCU sessions, see MCU Settings.)
ENDING CALLS
You can disconnect the current videoconference call at any time.
To end the current call:
On the remote control, press the red
End Call
button,
– or –
Select
Hang Up
in the GUI and then press
OK
on the remote control.
Collaborate Room: User Guide 29
