15
YOURx-Aerial Terminal
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 019588 REV B - Sept 2018
Preparing End Plates for Splicing
Step 1:
Locate the two end plates.
Step 2:
Position all four of the cable entrance ½ grommets in the end plates.
Step 3:
For each cable entrance that will be used, trim the compression grommet to fit the cable being utilized (up to ¾ inch
outer diameter) as shown.
Note:
It may be easier to trim the grommets to size before inserting them into the end plates.
