11
YOURx-Aerial Terminal
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 019588 REV B - Sept 2018
Installing FLATdrop and D-ROP with FlexConnector
Step 1:
Push the YOURx breakout with SC connector assembly
(FLATdrop or D-ROP) through FlexPort.
WARNING
:DO NOT INSTALL CONNECTOR
HOUSING UNTIL INSTRUCTED
IMPORTANT
Step 3:
After pulling fiber into terminal, complete the
“Pushable Connector” housing as instructed.
Step 4:
Inspect Then Connect!
Follow our recommended
Connector Cleaning Procedures included in this manual for a reliable
connection.
Step 5:
Route slack around fiber drop management rings.
Step 2:
Firmly seat the FlexConnector (FLATdrop or D-ROP) into the
FlexPort.
