Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
10
YOURx-Aerial Terminal
Installation Manual
_________________________________________________________
Manual 019588 REV B - Sept 2018
Installing Microduct and Push/Pull Fiber Drops
Step 2:
Insert the pull string, if one is being utilized, through
the FlexPort, and firmly seat the microduct into the FlexPort.
Step 3:
Tie the pull string to the bulkhead until you are ready to
pull in a fiber drop.
Step 1:
De-burr the microduct, using the de-burring tool or similar device (snips or cable knife), creating a cone shape on
the inside of the microduct for a smooth transition.
Step 4:
After pulling fiber into terminal, complete the
“Pushable Connector” housing as instructed with the specific
connector being utilized.
Step 5: Inspect Then Connect!
Follow our recommended
Connector Cleaning Procedures included in this manual for a
reliable connection.
Step 6:
Make the connection to the assigned port.
Step 7:
Route slack around fiber drop management rings.
