5
Set up the Modem (continued)
Connect to CLEAR 4G
As the Modem is searching for the CLEAR 4G signal, five LED lights, located on the front of the
Modem, will blink sequentially and then in unison. When the Modem is connected to the CLEAR 4G
signal, the LED lights will stop blinking and remain lit.
Note:
The number of LED lights indicates the CLEAR 4G signal strength – the more lights, the
stronger the signal. For optimal signal strength, you should try different locations for the Modem to
ensure a minimum of two LED lights are lit. If at least two LED lights are not lit, try moving the
Modem to another room.
Move just the Modem (not your computer) to another room, and wait 15—20 seconds after the LED
lights are solid white, in order to obtain the most accurate reading of the CLEAR 4G signal.
To optimize the signal strength in the Modem’s current location, try turning the Modem by small 1/4
‖
increments.
LED Lights
