CleanSpace CS302, User Instructions

Page: 26 / 90

26
STEP 6 – DON THE RESPIRATOR
Locate your blower and neck support. Make sure neck support is of the size that you used for your last
successful fit test.
Fit a neck support to the respirator
Align the neck support with the blower,
the two arms with the rounded heads
should be at the top. Locate the bottom
arms of the neck support in the grooves
at the bottom of the unit and slide neck
support upwards until you hear a ‘click’.
Familiarize yourself with the Adjust Buttons and the
Mask Release Buttons.
Mask Release Button and Adjust Button.
Loosen both bellows to their
widest opening.
Press the adjust button on the
blower and pull on the bellows to
extend them.
Place the machine in Standby
Mode.
Press the Power button once.
NOTE: Please read STEP 4 all the way through before beginning to don CleanSpace PAPR.